Centralized Controller BS-SL8200C
Dimension
Features
Precautions
·LCD display
·High-performance 32-bit ARM9 MCU:
·Embedded Linux OS platform;
·With 10/100M Ethernet interface RS485 interface, USB interface;
·Support GPRS/4G and Ethernet communication mode;
·Firmware upgrading: online, cable and local USB disk;
·Built-in smart meter: remotely data reading
(including external meter);
·Built-in PLC communication module;
·Built-in 4 DO、8 DI(6DCIN+2AC IN);
·Built-in RTC, support local scheduled task;
·Optional configuration: GPS;
·Fully sealed enclosure: anti-interference, withstand high voltage,
lightning andhigh frequency signal interference;
·Communication module replaceable:
BOSUN-SL8200C with PLC
BOSUN-SL8200CZ with ZigBee
BOSUN-SL8200CT with RS485
BOSUN-SL8200CLR with LoRa-MESH
Please read this specification carefully before use, so as to avoid
anyinstallation error that might cause the malfunction of
the device.
Transportation and storage conditions
(1) Storage Temperature:-40°C~+85°C;
(2) Storage Environment:avoid any humid, wet env;
(3) Transport: avoid falling;
(4) Stockpiling: avoid over-piling;
Notice
(1) On-site installation should bebyprofessional personnel;
(2) Do not install the device in a long-termhigh temperature
environment, which mightshorten its lifetime.
(3) Well insulate the connects during theinstallation;
(4) Wire the device STRICTLY according tothe attached diagram,
inappropriate wiringmight cause deadly damage to the device;
(5) Add a 3P air switch to the front of the ACinput in order to ensure
safety:
(6) Install the antenna(if have) out of thecabinet for better wireless
signal.
Parameters
Basic Functions
Safety Performance Index
EMC Index
Wiring Diagram
·Ua, Ub, Uc are for AC input, N for null line;
·la, lb, lc are for the current detecting input, they cannot be directly connected to AC ,and must install an AC transformer;
·la, Ib, lc must be STRICTLY connected to phase A/B/C ac input;
·DO1-DO4 is for digital output to control the AC contactor; A converter is needed tocontrol 380V AC contactor, the common
port is AC-IN, connecting to AC live line
·lz is for leakage detection, need to connect to an external zero sequence currenttransformer to detect leakage current.
·DI1-Dl6 is for digital input, the common port is DI COM, it cannot be connected toAC/DC current or voltage.
·AC DI1， AC Dl2 are for AC detection input, the common port is AC N, it cannot beconnected to DC current or voltage.
·12V+，GND are for external battery, positive and negative points must not becorrect;
·13.5V+，GND is for external power supply connection, providing DC 13.5V/200mAPlease connect“+“ correctly, and make
sure the external device current is no more
PROJECT REFERENCE
PRODUCTS REFERENCE
